注册 登录  
 加关注
   显示下一条  |  关闭
温馨提示!由于新浪微博认证机制调整,您的新浪微博帐号绑定已过期,请重新绑定!立即重新绑定新浪微博》  |  关闭

Sonny

Hakuna Matata …………

 
 
 

日志

 
 
关于我

……要相信生活是美好的,幸福会到来的。…… QQ 20646620

网易考拉推荐

Naiad for linux setup  

2012-05-05 01:41:15|  分类: naiad |  标签: |举报 |字号 订阅

  下载LOFTER 我的照片书  |
到处翻腾和查找啊,终于给搞定了。 只可惜手头没有破解过到授权文件啊 安装方法留一份给有兴趣的朋友看看。

   1. 1 下载naiad。
   2. 2解压naiad到文件夹,最好带上版本好,以便安装多个版本
   3. 3判断你是什么shell,可以用命令echo $SHELL 判断。
   4. 4在你的文件夹里找到这样两个文件:naiadVars.bash 和 naiadVars.csh. 如果你正在使用bash shell, 那么你就编辑naiadVars.bash;如果是csh shell 那就编辑naiadVars.csh。把你要安装的目录添到$NAIAD_PATH后,例如:/usr/exoticmatter/naiad-0.6.0.40-x86_64保存。
   5. 5编辑.bashrc or .profile 文件,在你的用户目录里,可以ls -a察看到。
   6.   bash你就加下面的
   7. source /usr/exoticmatter/naiad-0.6.0.40-x86_64/naiadVars.bash 等于你在上面naiadVars.bash加入的路径无后面
   8. 如果使用 tcsh or csh,你就加入下面的
   9. source /usr/exoticmatter/naiad-0.6.0.40-x86_64/naiadVars.csh 等于你在上面naiadVars.bash加入的路径
  10. 6、把你解压的文件目录拷贝到你在naiadVars.bash加入的路径。
  11. 7 、退出所有terminal shell窗口。开新shell窗口,输入naiad.出现这个消息:
  12. Exotic Matter’s Naiad Dynamics Server (0.6) Running.
  13. Listening to the Naiad Interface (Ni) Revision 1.
  14. The Naiad Interface is Copyright 2009-2011 Exotic Matter AB.
  15. 8.如果你有注册文件,运行
  16. Exotic Matter’s License Server Application  命令是: lmx-serv-exotic -l exoticmatter.lic
  17. 9.运行naiad studio使用命令:nstudio
  18. 可以时试用30天。


原文

   1. 1.3.2 Installing Naiad on Linux
   2. Installation on Linux needs to be done manually, and there is no installation program like on Windows. However, it is still very simple to install Naiad on Linux - just follow the steps below:

   1.
      Download the correct installer file from our FTP or website. The file will be called:
      naiad-VERSION.LINUX.x86_64.tgz, where VERSION means the latest Naiad version.
      For the sake of simplicitly, let’s assume that the version is always0.6.0.40, in which case the installer file would be called naiad-0.6.0.40.LINUX.x86_64.tgz.
   2.
      Open up a terminal shell and extract the installer file using the following command:
      tar xvfz naiad-0.6.0.40.LINUX.x86_64.tgz.
      Remember to substitute 0.6.0.40 with the actual number of the Naiad version you downloaded.
   3.
      A new folder will be created as a result of the extration command. The new folder has the name:
      naiad-0.6.0.40-x86_64.
      Simply move this folder to wherever you’d like to keep the Naiad installation.
   4. Now you need to configure the Naiad setup script (which sets up the Naiad environment). If you look inside the Naiad installation folder you just extracted (and possibly moved), you will find two files:naiadVars.bash and naiadVars.csh. If you are using a bash shell, you will need to edit the naiadVars.bash script, otherwise edit the naiadVars.csh script. If you are uncertain as to which shell you are using, you can find out by simply entering echo $SHELL in the terminal. Now open the relevant setup script using any text editor (gedit to name one), and replace the first line in the file with the absolute path to the Naiad installation folder. For example, if you moved it to/usr/exoticmatter, then the absolute path would be/usr/exoticmatter/naiad-0.6.0.40-x86_64. Doing this will set the all-important $NAIAD_PATH environment variable to point to the Naiad installation you want to use. If you have multiple Naiad versions installed, you can easily change the Naiad version to use by pointing this variable at the desired Naiad install folder.
   5.
      Ensure the setup script is sourced at startup. For example, if you are using a bash shell, you can add the following line to either your.bashrc or .profile script:
      source /usr/exoticmatter/naiad-0.6.0.40-x86_64/naiadVars.bash
      If using tcsh or csh, you would instead add
      source /usr/exoticmatter/naiad-0.6.0.40-x86_64/naiadVars.csh
      to your .cshrc file. (Obviously these examples assume you moved the Naiad install folder to /usr/exoticmatter).
   6.
      Finally, quit all terminal shells. Then open a new terminal shell and type:
      naiad
      If the installation is correct, then the output should begin with:
      Exotic Matter’s Naiad Dynamics Server (0.6) Running.
      Listening to the Naiad Interface (Ni) Revision 1.
      The Naiad Interface is Copyright 2009-2011 Exotic Matter AB.
      ...
   7.  
   8. 1.4 Running Naiad
   9. With the installation and licensing out of the way, only one task now remains before you can achieve Naiad dynamics domination: launching the Exotic Matter license server application!
  10.  
  11. 1.4.1 Launching Exotic Matter’s License Server Application
  12. Before you can launch Naiad Studio (or any of the other Naiad clients), you need to make sure the Exotic Matter license server is running, ready to serve up your Naiad license(s). This section briefly describes the process of launching the license server application, which is called lmx-serv-exotic.
  13.

  14.  
  15. On Linux
  16. On Linux, open a terminal shell and enter:
  17. lmx-serv-exotic -l exoticmatter.lic
  18. where exoticmatter.lic is the name of the license file you have received. The license file can be located anywhere as long as you specify its full path.
  19. The license server should now start up with a long text message. However, you should see "Serving the following features:" among the output text, and the feature "NAIAD" appearing.
  20.  
  21. Ensuring the License Server Is Reachable From Client Computer
  22. Whatever computer you wish to run Naiad on, you should check that it can reach the license server application. You may do so by opening another terminal window and running the following command:
  23. lmxendutil -licstat
  24. If this computer can reach the license server, you will see text output telling you so, including the total Naiad license count.
  25. If the computer is unable to automatically connect to the license server, the most likely reason is that the communication is blocked by firewall rules. To resolve this, open port number 6200 (TCP and UDP) in the firewall, both on the server and the clients, and possibly (but less likely) on any router or hardware firewall in between them.
  26.  
  27. 1.4.2 Launching Naiad Studio
  28. Naiad Studio is Exotic Matter’s open-source application that provides a user-friendly 3D graphical user interface to the powerful Naiad dynamics server. You can use Naiad Studio to create, edit, and visualize the Naiad graphs and the simulations they define.
  29. To launch Naiad Studio, do one of the following:
  30.  
  31. On Windows
  32. Double-click on the Naiad Studio icon on the Desktop.
  33. Select Naiad from Start > All Programs > Exotic Matter > Naiad
  34. Using a command prompt, navigate to the Naiad Studio application directory (by default \Program Files\Exotic Matter\Naiad-0.6\Clients\Naiad Studio\bin) and enter nstudio.
  35.  
  36. On Linux
  37. Open a terminal shell and enter
  38. nstudio

此翻译版本来源于网络

留图留念

Naiad for linux setup - sonny - Sonny
  评论这张
 
阅读(1771)| 评论(0)
推荐 转载

历史上的今天

在LOFTER的更多文章

评论

<#--最新日志,群博日志--> <#--推荐日志--> <#--引用记录--> <#--博主推荐--> <#--随机阅读--> <#--首页推荐--> <#--历史上的今天--> <#--被推荐日志--> <#--上一篇,下一篇--> <#-- 热度 --> <#-- 网易新闻广告 --> <#--右边模块结构--> <#--评论模块结构--> <#--引用模块结构--> <#--博主发起的投票-->
 
 
 
 
 
 
 
 
 
 
 
 
 
 

页脚

网易公司版权所有 ©1997-2017